Difference between revisions of "SNMP From Within A Routing-Instance"
Jump to navigation
Jump to search
(Created page with "If you want to do SNMP polling from within a routing-instance on a Juniper (EX for sure, not sure if it's the same on the MX), you need to adjust the config as follows: <PRE>...") |
(No difference)
|
Latest revision as of 16:00, 18 October 2021
If you want to do SNMP polling from within a routing-instance on a Juniper (EX for sure, not sure if it's the same on the MX), you need to adjust the config as follows:
snmp { community MyROString { authorization read-only; clients { 192.168.1.100/32; } routing-instance INSTANCE2 { clients { 10.10.10.100/32; } } } }
Then, the SNMP poller within the routing-instance needs to adjust the SNMP community to be routing-instance@community
INSTANCE2@MyROString