Multicast Over DMVPN

From Baranoski.ca
Revision as of 23:47, 6 April 2015 by Casey (talk | contribs) (Created page with "Once you've got your DMVPN up and running, as shown in DMVPN, you can enable multicast and PIM. You just need to know the IP address of your rendezvous point (RP). The...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Once you've got your DMVPN up and running, as shown in DMVPN, you can enable multicast and PIM.

You just need to know the IP address of your rendezvous point (RP). Then you can roll this out to your hub(s). 

ip multicast-routing
!
interface Tunnel0
 description DMVPN
 ip pim dr-priority 20
 ip pim sparse-mode
!
ip pim rp-address 10.16.10.251

The spokes get the same configuration, minus the dr-priority line.

Retrieved from "https://baranoski.ca/index.php?title=Multicast_Over_DMVPN&oldid=226"