Difference between revisions of "Multicast Over DMVPN"
Jump to navigation
Jump to search
(Created page with "Once you've got your DMVPN up and running, as shown in DMVPN, you can enable multicast and PIM. You just need to know the IP address of your rendezvous point (RP). The...") |
(No difference)
|
Revision as of 23:47, 6 April 2015
Once you've got your DMVPN up and running, as shown in DMVPN, you can enable multicast and PIM.
You just need to know the IP address of your rendezvous point (RP). Then you can roll this out to your hub(s).
ip multicast-routing ! interface Tunnel0 description DMVPN ip pim dr-priority 20 ip pim sparse-mode ! ip pim rp-address 10.16.10.251
The spokes get the same configuration, minus the dr-priority line.