Difference between revisions of "Bridge Groups And Double Tagging"
Jump to navigation
Jump to search
(Created page with "It doesn't work.") |
|||
Line 1: | Line 1: | ||
It doesn't work. | It doesn't work. | ||
+ | |||
+ | For reference, here's a standard bridging config. For a reason I haven't confirmed yet, it won't communicate on the double tagged interface. | ||
+ | |||
+ | <PRE> | ||
+ | bridge irb | ||
+ | bridge 1 protocol ieee | ||
+ | bridge 1 route ip | ||
+ | ! | ||
+ | interface BVI1 | ||
+ | ip address 10.10.10.10 255.255.255.0 | ||
+ | ! | ||
+ | interface GigabitEthernet8.2000 | ||
+ | encapsulation dot1q 10 second-dot1q 2000 | ||
+ | bridge-group 1 | ||
+ | ! | ||
+ | </PRE> |
Revision as of 17:26, 21 February 2019
It doesn't work.
For reference, here's a standard bridging config. For a reason I haven't confirmed yet, it won't communicate on the double tagged interface.
bridge irb bridge 1 protocol ieee bridge 1 route ip ! interface BVI1 ip address 10.10.10.10 255.255.255.0 ! interface GigabitEthernet8.2000 encapsulation dot1q 10 second-dot1q 2000 bridge-group 1 !