DMVPN With Internet In A Separate VRF
This is the complementary to Hosting Multiple DMVPNs and DMVPN With Multiple VRFs.
Let's say you want to have your Internet connection isolated in a VRF. A couple scenarios why:
- You want to use the global table for your private traffic.
- You're using certain Cisco features that don't work in VRF's. For example, TACACS in some code versions
- You want the added security of having your inside and outside traffic separated by a VRF boundary.
- You want to prevent the local users from using the local internet feed, and force them through some firewalls and content filters at your head office.
- You're an ISP and want to keep everything isolated by VRFs, including Internet. That allows you to use your global table just for MPLS.
Configuration
First, set up your Internet VRF:
ip vrf INTERNET rd 1:1 ! interface FastEthernet0 description INTERNET CONNECTION ip vrf forwarding INTERNET ip address 192.0.2.2 255.255.255.252 ! ip route vrf INTERNET 0.0.0.0 0.0.0.0 192.0.2.1 name DEFAULT_ROUTE
Everything else is configured like any of my other DMVPN examples, with the exception of two things.
Firstly, instead of defining a standard ISAKMP crypto key with the crypto isakmp key ... command, you'll create a keyring and associate it with a VRF:
crypto keyring CRYPTOKEYRING vrf INTERNET pre-shared-key address 0.0.0.0 0.0.0.0 key aw3s0m3crypt0k3y
Secondly, you need to associate the encapsulated tunnel traffic with the VRF. This is not the same as just using the ip vrf forwarding <VRF> command! This command tells the router which VRF to use for sending the packets out after they have been given a GRE header and encrypted. ip vrf forwarding <VRF> tells the router which VRF the packets should go in to after they have been received from the internet, decrypted, and have had the GRE header removed.
interface Tunnel0 tunnel vrf INTERNET