SNMP From Within A Routing-Instance

If you want to do SNMP polling from within a routing-instance on a Juniper (EX and SRX for sure, not sure if it's the same on the MX), you need to adjust the config as follows:

snmp {
    community MyROString {
        authorization read-only;
        clients {
            192.168.1.100/32;
        }
        routing-instance INSTANCE2 {
            clients {
                10.10.10.100/32;
            }
        }
    }
}

Then, the SNMP server polling the device from within the routing-instance needs to adjust the SNMP community to be routing-instance@community

INSTANCE2@MyROString