View source for SNMP From Within A Routing-Instance

If you want to do SNMP polling from within a routing-instance on a Juniper (EX for sure, not sure if it's the same on the MX), you need to adjust the config as follows:
<PRE>
snmp {
    community MyROString {
        authorization read-only;
        clients {
            192.168.1.100/32;
        }
        routing-instance INSTANCE2 {
            clients {
                10.10.10.100/32;
            }
        }
    }
}
</PRE>

Then, the SNMP poller within the routing-instance needs to adjust the SNMP community to be routing-instance@community
<PRE>
INSTANCE2@MyROString
</PRE>